Make an Enquiry

Bel Canto e.One PHONO pre-amplifier

Please select an option

The Bel Canto e.One Phono phono stage is the latest high-performance phono stage from Bel Canto. On demonstration.

PHONO Preamplifier

The PHONO preamp will unleash tremendous dynamics and resolution to your listening experience.

Optimized two stage architecture
Low noise 40dB input stage
Custom discrete output stage with adjustable gain
Precision RIAA network
High drive output buffer
Low noise multi-stage channel independent power supply
Ground optimized PCB layout

Bel Canto e.One Phono phono stage features

DSSA, Discreet Single Stage Amplifier
This is a very fast, low noise amplifier with a single-stage folded cascode architecture and over 500mA of peak current output capability. It maintains very low constant distortion levels through the audio band because of its high open-loop bandwidth. The DSSA module brings a further element of dynamic resolution and contrast to the e.One Phono. The vertical modular design permits a tight, efficient Printed Circuit Board (PCB) layout that combines the best of IC based and discrete component design.

Bandwidth:	1Hz-50KHz
RIAA Accuracy:	20Hz-20KHz +/- 0.2 dB
Signal to Noise Ratio 40 dB gain:	>80 dB A weighted, re 5mV RMS in
Distortion @ 2 Volt RMS/1KHz:	<0.01%
Input Impedance:	Adjustable 31 to 47k (View dip switch alignment)
Gain Level Options:	Adjustable 38dB to 60dB (View dip switch alignment)
General:
Power On usage:	10W
Power Off usage:	0.0W
Internally Set Operating Voltages:	100-120VAC or 230-240VAC 50/60 Hz
Size:	8.5 x 3.5 x 12?, 216 x 88 x 305mm (W x H x D)
Weight:	10lbs, 4.5Kg

Many years ago Bel Canto made the choice to design compact high-quality components set to the highest standards, using the finest materials. We call it e.One or Evolution One, adapted for the continuously advancing digital world remaining true to the audio event. Today we offer audio products with more features, flexibility, and performance than ever before with both budget and lifestyle in mind.

Categories:

The Bel Canto PHONO preamp is suitable for both moving magnet (MM) and moving coil (MC) cartridges. On demonstration at Criterion Audio Cambridge.

The PHONO preamp will unleash tremendous dynamics and resolution to your listening experience.

Gain and Resistance Customisation
The PHONO can work with a wide variety of cartridges by adjusting the dip switches for gain and resistance on the back of the unit.

Optimized two stage architecture
Low noise 40dB input stage
Custom discrete output stage with adjustable gain
Precision RIAA network
High drive output buffer
Low noise multi-stage channel independent power supply
Ground optimized PCB layou

DSSA, Discreet Single Stage Amplifier

This is a very fast, low noise amplifier with a single-stage folded cascode architecture and over 500mA of peak current output capability. It maintains very low constant distortion levels through the audio band because of its high open-loop bandwidth. The DSSA module brings a further element of dynamic resolution and contrast to the e.One Phono. The vertical modular design permits a tight, efficient Printed Circuit Board (PCB) layout that combines the best of IC based and discrete component design.

Bandwidth:	1Hz-50KHz
RIAA Accuracy:	20Hz-20KHz /- 0.2 dB
Signal to Noise Ratio 40 dB gain:	>80 dB A weighted, re 5mV RMS in
Distortion @ 2 Volt RMS/1KHz:	<0.01%
Input Impedance:	Adjustable 31 to 47k
Gain Level Options:	Adjustable 38dB to 60dB
General:
Power On usage:	10W
Power Off usage:	0.0W
Internally Set Operating Voltages:	100-120VAC or 230-240VAC 50/60 Hz
Size:	8.5 x 3.5 x 12?, 216 x 88 x 305mm (W x H x D)
Weight:	10lbs, 4.5Kg